GME Supply is North America's Premier Outfitter of fall protection, safety equipment, and gear for at-height workers, industry, and construction.

1391 E Boone Industrial Blvd
Columbia, MO 65202
(718) 210-3913

Home » Blog » Not Your Average Metal Loop

GME BLOG

Climb Higher Blog - A blog about Tower Climbing Safety Gear

Not Your Average Metal Loop

This little loop of metal has come a long way. The term carabiner comes from German, “karabinerhaken” which means hook for a carbine. Before they were saving your life, the first carabiners were used for sailing and weren’t made to support a load. They usually just had a spring loaded wire closure, which was not made to catch a person’s weight, when they… say… fell off a tower.   Two Carabiners   The first load-bearing carabiners were hand-forged steel. Lighter aluminum versions came around WWII but there were no safety features, such as auto-twist gates. And the shapes were pretty basic ­– usually just an oval, which led to cross-gate loading, causing the ropes to slip out. That’s bad.   Obviously, a lot has changed over the decades. Carabiners are better, and you should be pretty pumped about that. Instead of an oval, there are offset D shapes or larger pear-shaped carabiners. The closing function is much better. Instead of a light wire gate, there are screw or auto twist gates. Each revision has made the carabiner more functional and safer. That’s good. Carabiner ANSI Gate   In our industry, carabiners must comply with specific regulations. The American National Standards Institute (ANSI) says that for a carabiner to be used in fall protection it must have a strength rating of 5,000 pounds, or 22 kilonewtons and gate strength of 3,600 pounds, or 16 kilonewtons. The tested and approved ratings are always stamped or printed somewhere on the carabiner and gate. If you're not sure if yours are rated, or the stamps aren't visible… DON’T USE THEM!! (In case you were wondering: A newton is the force required to accelerate a one-kilogram mass one meter per second per second. 1000 N = 1kN = 224.8 lb force) OK! Enough math.   There are obviously a wide variety of carabiners, and they all have the same basic parts:
  • The body, which is a loop
  • The gate and hinge, which open to allow attachment
  • The inner sleeve, which is what the gate twists around
  Different carabiner options may work better for one application over another.  GME Supply can help you select the best one for you, so you can Climb Higher!   Carabiner Gate Closeup